| 1. | Aluminium based micro - particle metal coating
铝基金属微粉涂层 |
| 2. | Research on the properties of waterborne aluminium based metal micro - powder coating
水性铝基金属微粉涂层的性能研究 |
| 3. | Preparation and study on performance of new zinc - aluminium base corrosion - resistant coatings
树脂基复合材料用陶瓷涂层防护性能分析 |
| 4. | Preparation of diamond particles reinforced zinc aluminium based corrosion resistance coating and its properties
金刚石粒子增强锌铝基耐蚀涂层的制备及其性能 |
| 5. | Preparation of sic nanoparticles reinforced zinc aluminium based corrosion resistance coating and its properties research
2复合涂层在水介质中的耐冲刷腐蚀性能 |
| 6. | Preparation and properties of zinc aluminium based corrosion resistant coating reinforced with alumina nanoparticles
高温树脂基复合材料防护用轻质陶瓷涂层的制备 |
| 7. | By investigating the influence of drying temperature , it was found that the optimum drying temperature is differ from the base material , such as the drying temperature of cu based film is 200 , that of the glass based and aluminium based film is 240
铜、玻璃基涂层的最佳干燥温度分别为200和240 ，该温度下涂层形成微观凹凸结构，疏水性高；添加成珠剂能增加涂层表面粗糙度，提高涂层疏水性能。 |
| 8. | To solve the performance problems , low hardness and poor wear resistance and antifriction , of the zinc / aluminium based corrosion resistance coating at the special high speed and large friction service conditions , a trial adding diamond particles into the coating was made to enhance the coating properties
摘要为解决锌铝基耐蚀涂层在高速、强摩擦等特殊服役条件下硬度低、耐磨减摩性能差等问题，尝试通过添加金刚石粒子对其进行强化。 |
